Case Study: The Cooling System Was Running — But the Data Hall Was Still Overheating
OverviewData center cooling systems are often designed with redundant cooling units, pumps, and power supplies.
Cooling and Environmental ControlArticles / Knowledge Base
Articles / Knowledge Base
7 results
Integrated Systems Testing for Data Centers: Proving Resilience Through Real Failure Scenarios
A practical guide to Integrated Systems Testing in data centers, covering scenario development, failure injection, safety controls, power and cooling interactions, monitoring, recovery criteria, evidence and operational participation.
Testing and Commissioning
Environmental and Leak Monitoring in Data Centers: Sensors, Placement and Response
A practical guide to environmental monitoring in data centers, covering rack inlet temperature, humidity, dew point, water leak detection, fuel and room alarms, sensor placement, redundancy and response procedures.
BMS, EPMS and DCIM
Airflow Management in Data Centers: Hot Aisles, Cold Aisles and Containment
A practical guide to airflow management in data centers, explaining hot-aisle and cold-aisle layouts, containment, recirculation, bypass air, rack inlet temperatures, blanking panels and operational verification.
Cooling and Environmental Control
Chilled-Water Cooling Architecture for Data Centers: Chillers, Pumps, CRAHs and Redundancy
An engineering guide to chilled-water cooling in data centers, covering chillers, pumps, heat exchangers, CRAHs, supply and return temperatures, hydraulic design, redundancy, controls and maintenance states.
Cooling and Environmental Control
Environmental Control in Data Centers: Temperature, Humidity, Dew Point and Sensor Strategy
A practical guide to environmental control for data centers, explaining temperature, humidity and dew point at IT inlets, ASHRAE equipment classes, sensor placement, alarm thresholds, trends and change control.
Cooling and Environmental Control
Commissioning Data Center Cooling Systems: Proving Capacity, Redundancy and Failure Response
A practical cooling commissioning guide covering pre-functional checks, CRAHs, chillers, pumps, controls, sensor calibration, load simulation, failure scenarios, recovery and integrated systems testing.
Cooling and Environmental Control